|
|
|
|
Wall Mounted
The Handy-Rail system is wall mounted, on low density concrete (breeze blocks) or Concrete or brick. Not suitable for wood or plaster board construction.
|
 |
Wall mounting slots along length.
The back of the rail which is against the wall has slots along its entire length.
This enables the rail anchors to be positioned exactly.
|
 |
No slot alignment needed
The unique Rail-LOK system enables the rails to be mounted to the wall with out need to align to any front slots.
The support arms are bolted to a continuous open slot at the front of the rail giving infinite adjustment when aligning |
 |
Versatile
Our brackets are used as an anti-roll devise as shown. |
 |
Support Arms
The support arms are 400, 610 and 820mm long, when mounting shelves you can store large bulky plastic boxes etc, as shown. |
 |
Flush fit system
This part of the Handy-Rail system, enables work tops to be mounted onto support arms and fit flush against the wall, therefore no end or front supports are required, giving total access to underneath the work top, ideal for wheel chair access were the front supports can be a nuisance.
We can also create work stations using the same method, where the work surface mounted on the support arms but there is a gap at the rear of the work surface for cables etc, but still giving the advantages of no front side supports. |
|
|
|
|
